Alabama Woodworkers Guild

Work Groups => SketchUp Group => Topic started by: jeffbranch on October 21, 2018, 01:05:34 pm

Title: The Blanket Bench Model from 10/20/18 Workshop
Post by: jeffbranch on October 21, 2018, 01:05:34 pm
I have been asked to post the SketchUp model we discussed during the 10/20/18 workshop. See the link below. This bench was designed by Mark Edmundson and from his book, Pocket Hole Joinery. Since the joinery is simple, this was a good model to teach some basic SketchUp concepts.

https://3dwarehouse.sketchup.com/model/64c8bd03-a484-40de-a9fc-236e8dcb3fc0/Blanket-Bench (https://3dwarehouse.sketchup.com/model/64c8bd03-a484-40de-a9fc-236e8dcb3fc0/Blanket-Bench)